March 2023 - Hcitaly

CFP - One Week Left - Abstract 1-2 pages - Special Session on “eXtended Reality as a gateway to the Metaverse: Practices, Theories, Technologies and Applications” (IEEE MetroXRAINE 2023)

by Giuseppe Caggianese

****** One Week Left ****** Call for Papers Special Session on "eXtended Reality as a gateway to the Metaverse: Practices, Theories, Technologies and Applications" Abstract (1-2 pages) or alternatively, a Graphical Abstract by March 15, 2023 ********************************* Dear Colleagues, a friendly reminder that there is only one week left to contribute with an Abstract (1-2 pages) or a Graphical Abstract to the Special Session on “eXtended Reality as a gateway to the Metaverse: Practices, Theories, Technologies and Applications” - IEEE International Conference on Metrology for eXtended Reality, Artificial Intelligence, and Neural Engineering (IEEE MetroXRAINE 2023) - October 25-27, 2023 - Milan - https://metroxraine.org/special-session-17. After the abstract submission, you will have time until April 30 to finalize your contribution. Please see the CfP below for details and forward it to colleagues who might be interested in contributing to this special session. Visit the conference website for further and updated information https://metroxraine.org/. I'm looking forward to meeting you, virtually or in your presence, at IEEE MetroXRAINE 2023. Best wishes, Giuseppe Caggianese Giuseppe Caggianese, Ph.D. ------------------------------------------------------------- Research Scientist National Research Council (CNR) Institute for High-Performance Computing and Networking (ICAR) Via Pietro Castellino 111, 80131, Naples, Italy Telefono: +39 0816139227 Mobile: +39 3371588044 Skype: giuseppe.caggianese Email: giuseppe.caggianese(a)cnr.it ==================================================================================== Call for Papers - Special Session on: “EXTENDED REALITY AS A GATEWAY TO THE METAVERSE: PRACTICES, THEORIES, TECHNOLOGIES AND APPLICATIONS” https://metroxraine.org/special-session-17 2023 IEEE International Conference on Metrology for eXtended Reality, Artificial Intelligence, and Neural Engineering (IEEE MetroXRAINE 2023) https://metroxraine.org/ October 25-27, 2023 - Milan, Italy. ==================================================================================== SPECIAL SESSION DESCRIPTION ------------------------- The fast development of Virtual Reality (VR), Augmented Reality (AR), and Mixed Reality (MR) solutions over the last few years are transforming how people interact, work, and communicate. The eXtended Reality (XR) term encloses all those immersive technologies that can shift the boundaries between digital and physical worlds to realize the metaverse. According to tech companies and venture capitalists, the metaverse will be a super-platform that convenes sub-platforms: social media, online video games, and ease-of-life apps, all accessible through the same digital space and sharing the same digital economy. Inside the metaverse, virtual worlds will allow avatars to carry out all human endeavours, including creation, display, entertainment, social, and trading. Thus, the metaverse will evolve how users interact with brands, intellectual properties, health services, cultural heritage, and each other things on the Internet. A user could join friends to play a multiplayer game, watch a movie via a streaming service and then attend a university course precisely the same as in the real world. The metaverse development will require new software architecture that will enable decentralized and collaborative virtual worlds. These self-organized virtual worlds will be permanent and will require maintenance operations. In addition, it will be necessary to design an efficient data management system and prevent privacy violations. Finally, the convergence of physical reality, virtually enhanced, and an always-on virtual space highlighted the need to rethink the actual paradigms for visualization, interaction, and sharing of digital information, moving toward more natural, intuitive, dynamically customizable, multimodal, and multi-user solutions. This special session aims to focus on exploring how the realization of the metaverse can transform certain application domains such us: (i) healthcare, in which the metaverse solutions can, for instance, improve the communication between patients and physicians; (ii) cultural heritage, with potentially more effective solutions for tourism guidance, site maintenance, and heritage object conservation; and (iii) industry, where to enable data-driven decision making, smart maintenance, and overall asset optimisation. More information can be found here: https://metroxraine.org/special-session-17 TOPICS ---------- The topics of interest include, but are not limited to, the following: - Hardware/Software Architectures for metaverse - Decentralized and Collaborative Architectures for metaverse - Interoperability for metaverse - Tools to help creators to build the metaverse - Operations and Maintenance in metaverse - Data security and privacy mechanisms for metaverse - Cryptocurrency, token, NFT Solutions for metaverse - Fraud-Detection in metaverse - Cyber Security for metaverse - Data Analytics to Identify Malicious Behaviors in metaverse - Blockchain/AI technologies in metaverse - Emerging Technologies and Applications for metaverse - New models to evaluate the impact of the metaverse - Interactive Data Exploration and Presentation in metaverse - Human-Computer Interaction for metaverse - Human factors issues related to metaverse - Proof-of-Concept in Metaverse: Experimental Prototyping and Testbeds IMPORTANT DATES ------------------------ Abstract Submission Deadline: March 15, 2023. **NOTE that the abstract should be 1 - 2 pages. Final Paper Submission Deadline: April 30, 2023. Full Paper Acceptance Notification: June 15, 2023 Final Paper Submission Deadline: July 31, 2023 SUBMISSION AND DECISIONS ------------------------ Authors should prepare an Abstract (1 - 2 pages) that clearly indicates the originality of the contribution and the relevance of the work. The Abstract should include the title of the paper, names and affiliations of the authors, an abstract, keywords, an introduction describing the nature of the problem, a description of the contribution, the results achieved and their applicability. As an alternative to the traditional abstract, it is possible to submit a Graphical Abstract. For further information, please see here: https://metroxraine.org/initial-author-instructions. When the first review process has been completed, authors receive a notification of either acceptance or rejection of the submission. If the abstract has been accepted, the authors can prepare a full paper. The format for the full paper is identical to the format for the abstract except for the number of pages: the full paper has a required minimum length of five (5) pages and a maximum of six (6) pages. Full Papers will be reviewed by the Technical Program Committee. Authors of accepted full papers must submit the final paper version according to the deadline, register for the workshop, and attend to present their papers. The maximum length for final papers is 6 pages. All contributions will be peer-reviewed and acceptance will be based on quality, originality and relevance. Accepted papers will be submitted for inclusion into IEEE Xplore Digital Library. Submissions must be written in English and prepared according to the IEEE Conference Proceedings template. LaTeX and Word templates and an Overleaf sample project can be found at: https://metroxraine.org/initial-author-instructions. The papers must be submitted in PDF format electronically via EDAS online submission and review system: https://edas.info/newPaper.php?c=30746. To submit abstracts or draft papers to the special session, please follow the submission instructions for regular sessions, but remind to specify the special session to which the paper is directed. The special session organizers and other external reviewers will review all submissions. More information can be found here: https://metroxraine.org/initial-author-instructions CONFERENCE PROCEEDINGS ----------------------------------- All contributions will be peer-reviewed, and acceptance will be based on quality, originality, and relevance. Accepted papers will be submitted for inclusion into IEEE Xplore Digital Library. Extended versions of presented papers are eligible for post-publication; more information will be provided soon. ORGANIZERS ------------- Giuseppe Caggianese National Research Council of Italy giuseppe.caggianese@.cnr.it Ugo Erra University of Basilicata ugo.erra(a)unibas.it Luigi Gallo National Research Council of Italy luigi.gallo(a)cnr.it For any questions about the special session, please feel free to contact us via email.

2 years

1
0
0 0

19th IEEE eScience Conference (eScience 2023): Third Call for Papers

by georgeangelos60＠gmail.com

*** Third Call for Papers *** 19th IEEE eScience Conference (eScience 2023) October 9-13, 2023, St. Raphael Resort, Limassol, Cyprus https://www.escience-conference.org/2023/ eScience 2023 provides an interdisciplinary forum for researchers, developers, and users of eScience applications and enabling IT technologies. Its objective is to promote and encourage all aspects of eScience and its associated technologies, applications, algorithms, and tools, with a strong focus on practical solutions and open challenges. The conference welcomes conceptualization, implementation, and experience contributions enabling and driving innovation in data- and compute-intensive research across all disciplines, from the physical and biological sciences to the social sciences, arts, and humanities; encompassing artificial intelligence and machine learning methods; and targeting a broad spectrum of architectures, including HPC, Cloud, and IoT. The overarching theme of the eScience 2023 conference is “open eScience”. This year, the conference is promoting four additional key topics: • Computational Science for sustainable development • FAIR • Research Infrastructures for eScience • Continuum Computing: Convergence between Cloud Computing and the Internet of Things (IoT) The conference is soliciting two types of contributions: • Full papers (10 pages) presenting previously unpublished research achievements or eScience experiences and solutions • Posters (2 pages) showcasing early-stage results and innovations Submitted papers should use the IEEE 8.5×11 manuscript guidelines: double-column text using single-spaced 10-point font on 8.5×11-inch pages. Templates are available from http://www.ieee.org/conferences_events/conferences/publishing/templates.html . Submissions should be made via the Easy Chair system using the submission link: https://easychair.org/conferences/?conf=escience2023 . All submissions will be single-blind peer reviewed. Selected full papers will receive a slot for an oral presentation. Accepted posters will be presented during a poster reception. Accepted full papers and poster papers will be published in the conference proceedings. Rejected full papers can be re-submitted for a poster presentation. At least one author of each accepted paper or poster must register as an author at the full registration rate. Each author registration can be applied to only one accepted submission. AWARDS eScience 2023 will host the following awards, which will be announced at the conference. • Best Paper Award • Best Student Paper Award • Best Poster Award • Best Student Poster Award • Outstanding Early Career Contribution – this award is associated with poster submissions and short presentations of attendees in their early career phase (i.e., postdoctoral researchers and junior scientists). KEY DATES • Paper Submissions Due: Friday, May 26, 2023 (AoE) • Notification of Paper Acceptance: Friday, June 30, 2023 • Poster Submissions due: Friday, July 7, 2023 (AoE) • Poster Acceptance Notification: Monday, July 24, 2023 • All Camera-ready Submissions due: Monday, August 14, 2023 • Author Registration Deadline: Monday, August 14, 2023 ORGANISATION General Chair • George Angelos Papadopoulos, University of Cyprus, Cyprus Technical Program Co-Chairs • Rafael Ferreira da Silva, Oak Ridge National Laboratory, USA • Rosa Filgueira, University of St Andrews, UK Organisation Committee https://www.escience-conference.org/2023/organizers Steering Committee https://www.escience-conference.org/about/#steering-committee Email contact: Technical-Program(a)eScience-conference.org

2 years

1
0
0 0

CFP: Special issue on "Design Education for Hybrid Environments: Pedagogies, frameworks, and tools for crafting next-generation physical-digital spaces" - IxD&A Journal

by Carlo Giovannella

/Apologize for unintended cross-mailing/ ========================================================= /Note: //*Interaction Design and Architecture(s) Journal has migrated to https://ixdea.org/*// //The old website will no longer be updated from 5 March 2023 onwards./ ========================================================= Special Issue on *Design Education for Hybrid Environments: Pedagogies, frameworks, and tools for crafting next-generation physical-digital spaces *Call for Papers -> link <https://ixdea.org/design-education-for-hybrid-environments-pedagogies-frame…> to be published at the /*Interaction Design and Architecture(s) Journal (IxD&A)*/ (ISSN 1826-9745, eISSN 2283-2998) https://ixdea.org/ https://doi.org/10.55612/s-5002-000 ---------------------------------------------------------------- **** Since 2012 also in Scopus **** **** *Since 2015 also* in *Emerging Sources Citation Index* and *Web of Science* *** *---------------------------------------------------------------- IxD&A implements the Gold Open Access (OA) road to its contents with no charge to the authors (submission & paper processing) Help us in improving the quality of the editorial process and of the journal, please donate: -> link ========================================================= *Guest Editors:*  --------------------------------------------------------- -- /• Daniel Rosenberg Munoz, Carnegie Mellon University, USA • Dina El Zanfaly, Carnegie Mellon University, USA • Peter Scupelli, Carnegie Mellon University, USA • Daragh Byrne, Carnegie Mellon University, USA/ =========================================== *Important dates:* ----------------------------------------------------------- • Deadline: *May 20th, 2023* • Notification to the authors: July 31st, 2023 • Camera ready paper: September 20th, 2023 • Publication of the special issue: October 2023 (tentatively) =========================================== *Overview* ----------------------------------------------------------- Over the past few decades, interactive technologies have become more and more embedded in and blended with our physical world. These technologies—mobile computing, AR and VR, interactive IoTs, tangible interfaces, and responsive architectures—are increasingly shaping our daily experiences in our homes, workplaces, neighborhoods, and cities. We call these physical-digital spaces Hybrid Environments . As these technologies continue to transform the way we live, many new opportunities emerge for design education and practice. Within higher education, more and more programs aim to cross-train designers, architects, creative technologists, and artists to operate in these emerging terrains. This is a complex pedagogical practice. Designing for Hybrid Environments requires knowledge and training in the design of both physical environments and interactive technologies. Solutions cut across, and often operate at multiple, scales: from the object to the room, from the neighborhood to the city. Consequently, the design of good physical-digital spaces must often bridge fundamental knowledge in design, architecture, art, interactivity, and computation. How are we meeting this emergent need? How do we educate cross-trained students to creatively respond and adapt to these complex design spaces? In this special issue, we invite design educators to share their pedagogies, frameworks, and tools for crafting next-generation physical-digital spaces. We hope to gather, reflect, and share valuable examples and instructional practices so that we might learn from one another and critically examine how to teach students to design Hybrid Environments. Ultimately, we seek to form a common understanding and begin building the foundations for design education in this emerging field. ----------------------------------------------------------- *Topics of Interest* ----------------------------------------------------------- The indicative list of topics of interest for this special issue devoted to Design Education for Hybrid Environments includes, but is not limited to: • Teaching for and within VR, AR, and XR technologies. • Teaching for interactive IoT, spatial computing, ambient media, and responsive architecture. • CAD and CAM tools to help conceive, represent, prototype, and test Hybrid Environments. • Theoretical frameworks and representational techniques to navigating scales of design —from the object to the room, from the neighborhood to the city. • Cognitive approaches to explain and study reasoning, conceiving, and building Hybrid Environments. • Post-Pandemic Hybrid Environments, including telepresence, distributed spaces, and the temporality of experience. • Assessment and performance methods, including pilot studies, curricula, or cases of evaluating Hybrid Environments design and instruction. • Instructional experiences resilient to rapid change in technology infrastructures and toolsets. • Research methods supporting the design process and evaluation of Hybrid Environments. =========================================== /*Submission guidelines and procedure*/ ---------------------------------------------------------- All submissions (abstracts and later final manuscripts) must be original and may not be under review by another publication. The manuscripts should be submitted either in .doc or in .rtf format. All papers will be blindly peer-reviewed by at least two reviewers. Authors are invited to submit 8-20 pages paper (including authors' information, abstract, all tables, figures, references, etc.). The paper should be written according to the IxD&A authors' guidelines ->https://ixdea.org/authors-guidelines/ ========================================================== *Authors' guidelines* ---------------------------------------------------------- Paper submission page: -> link <https://www-2020.ixdea.uniroma2.it/ojs/ixdea/login> (Please upload all submissions using the Submission page. When submitting the paper, please, choose the section: "SI: Design Education for Hybrid Environments") More information on the submission procedure and on the characteristics of the paper format can be found on the website of the IxD&A Journal where information on the copyright policy and responsibility of authors, publication ethics and malpractice are published. For scientific advice and queries, please contact the IxD&A scientific editor marking the subject as: /IxD&A special issue on Design Education for Hybrid Environments/ • drosenb2 [at] andrew [dot] cmu [dot] edu -----------------------------------------------------------------------------* *** * Forthcoming issues:* https://doi.org/10.55612/s-5002-000 • N.56 'Hybrid Games and Interaction Design' Guest editors: Nelson Zagalo, Micael Sousa, Ana Patrícia Oliveira, Fotis Liarokapis • N.57 'Competence based education: from school to responsible citizenship, wellbeing and democracy.' Guest editors: Stefania Bocconi, Stefano Cacciamani, Romina Cachia, Arianna Sala, Nadia Sansone • N.58 'Age Against the Machine: A Call for Designing Ethical AI for and with Children' Guest editors: Sumita Sharma, Eva Durall Gazulla, Marianne Kinnula, Nitin Sawhney • N.59 'AI for Humans and Humans for AI: Towards Cultures of Participation in the Digital Age' Guest editors: Renate Andersen, Vita Santa Barletta, anders Mørch, Alesandro Pagano 'Design Education for Hybrid Environments: Pedagogies, frameworks, and tools for crafting next-generation physical-digital spaces' Guest editors: Daniel Rosenberg Munoz, Dina El Zanfaly, Peter Scupelli, Daragh Byrne • N.60 • ‘SLE as engines of the twin transition’ Guest editors: Mihai Dascalu, Oscar Mealha, Sirje Virkus • ‘Technologies, Tools, and Techniques for Online Design-Based Activities with Children’ Guest editors: Naska Goagoses, Heike Winschiers-Theophilus, Erkki Rötkönen, Tariq Zaman • ‘Designing for People in Human-Robot Collaboration’ Guest editors: Stine S. Johansen, Alan Burden, Eike Schneiders, Alexander N. Walzer ----------------------------------------------------------

2 years

1
0
0 0

UMAP ’23: 31st ACM Conference on User Modeling, Adaptation and Personalization: Fourth Call for Late-Breaking Results and Demos

by georgeangelos60＠gmail.com

*** Fourth Call for Late-Breaking Results and Demos *** UMAP ’23: 31st ACM Conference on User Modeling, Adaptation and Personalization June 26 - 29, 2023, St. Raphael Resort, Limassol, Cyprus https://www.um.org/umap2023/call-for-late-breaking-results-and-demos/ Submissions due: April 24, 2023 Submission site: https://easychair.org/conferences/?conf=umap23 IMPORTANT DATES ● Submission of papers: April 24, 2023 ● Notification of acceptance: May 10, 2023 ● Camera-ready versions of accepted papers: May 18, 2023 ● Conference: June 26-29, 2023 Note: The submission times are 11:59 pm AoE time (Anywhere on Earth) SUBMISSION FORMATS Demonstrations ● Max. 5 pages + max. 1 additional page for references; ● (Optional) video or external material demonstrating the system; ● Publication in ACM UMAP 2023 Adjunct Proceedings; ● Presentation as a demo + poster at the conference. Description: Demonstrations will showcase research prototypes and commercially available products in a dedicated session. Demo submissions must be based on an implemented and tested system that pursues one or more innovative ideas in the interest areas of the conference. Demonstrations are an excellent and exciting way to showcase implementations and get valuable feedback from the community. Each demo submission must make clear which aspects of the system will be demonstrated, and how these will be demonstrated on-site as well as online. To better identify the value of demos, we also encourage authors to submit a pointer to a screencast (max. 5 minutes on Vimeo or YouTube) or any external material related to the demo (e.g., shared code on GitHub). Descriptions of demonstrations should have a length of max. 5 pages + 1 page of references in the new ACM single-column style. On an extra page (not to be published), submissions should include a specification of the technical requirements for demonstrating the system at UMAP 2023. Late-Breaking Results ● Max. 7 pages + max. 2 additional pages for references; ● (Required) unpublished page with a list of questions the authors aim to get feedback on; ● Publication in ACM UMAP 2023 Adjunct Proceedings; ● Presentation as a (potentially virtual) poster at the conference. Description: Late-Breaking Results (LBR) are research-in-progress that must contain original and unpublished accounts of innovative research ideas, preliminary results, industry showcases, and system prototypes, addressing both the theory and practice of User Modeling, Adaptation, and Personalization. In addition, papers introducing recently started research projects or summarizing project results are welcome as well. We encourage researchers and practitioners to submit late-breaking work as it provides a unique opportunity for sharing valuable ideas, eliciting useful feedback on early-stage work, and fostering discussions and collaborations among colleagues. Late-Breaking Results papers have a length of up to 7 pages + 2 pages of references in the new ACM single-column style and will be presented to the conference as posters. On an extra page (not to be published), submissions should include a list of questions that the authors aim to get feedback on during the poster session at UMAP 2023. SUBMISSION AND REVIEW PROCESS Papers will be reviewed single-blind and do not need to be anonymised before submission Papers must be formatted according to the new workflow for ACM publications. The templates and instructions are available here: https://www.acm.org/publications/taps/word-template-workflow. Authors should submit their papers as single-column. The templates are available here (we strongly recommend the usage of LaTeX for the camera-ready papers to minimize the extent of reformatting): ● LaTeX (use \documentclass[manuscript,review]{acmart} in the sample- authordraft.tex file for single-column): https://www.acm.org/binaries/content/assets/publications/consolidated-tex-t… ● Overleaf (use \documentclass[manuscript,review]{acmart} for single-column): https://www.overleaf.com/latex/templates/acm-conference-proceedings-master-… ● MS Word: https://www.acm.org/binaries/content/assets/publications/taps/acm_submissio… Note: Accepted papers will require further revision to meet the requirements and page limits of the camera-ready format required by ACM. Instructions for the preparation of the camera-ready versions of the papers will be provided after acceptance. The ACM Code of Ethics gives the UMAP program committee the right to (desk-) reject papers that perpetuate harmful stereotypes, employ unethical research practices, or uncritically present outcomes/implications that clearly disadvantage minority communities. Submit your papers in PDF format via EasyChair for ACM UMAP 2023 Demos and Late-Breaking Results at https://easychair.org/conferences/?conf=umap23 (choose “New Submission” and make sure to select “UMAP'23 - LBR and Demos” track). The review process will be single-blind, i.e., authors’ names should be included in the papers. Submissions will be reviewed by at least two independent reviewers. They will be assessed based on their originality and novelty, potential contribution to the research field, potential impact in particular use cases, and the usefulness of presented experiences, as well as their overall readability. Papers that exceed the page limits or do not adhere to the formatting guidelines will be returned without review. UMAP has a *no dual submission* policy, which is why full paper submissions should not be currently under review at another publication venue. Further, UMAP operates under the ACM Conference Code of Conduct (https://www.acm.org/about-acm/policy-against-harassment) as well as the ACM Publication Policies and Procedures (https://www.acm.org/publications/policies). PUBLICATION AND PRESENTATION Accepted Demo and Late-Breaking Results papers will be published in the ACM UMAP 2023 Adjunct Proceedings in the ACM Digital Library. Papers will be accessible from the UMAP 2023 website through ACM OpenToc Service for one year after publication in the ACM Digital Library. All categories will be presented at the poster reception of the conference, in the form of a poster and/or a software demonstration following poster format. This form of presentation will provide presenters with an opportunity to obtain direct feedback about their work from a wide audience during the conference. To be included in the Proceedings, at least one author of each accepted paper must register for the conference and present the paper there. LATE-BREAKING RESULTS AND DEMO CHAIRS ● Ludovico Boratto, University of Cagliari, Italy ● Alisa Rieger, Delft University of Technology, Netherlands ● Shaghayegh (Sherry) Sahebi, University at Albany – SUNY, USA ● Contact: HYPERLINK "mailto:umap2023-lbr@um.org"umap2023-lbr(a)um.org

2 years, 1 month

1
0
0 0

[CFP] Workshop on "AI per la Sostenibilità"@Ital-IA 2023

by Marco Polignano

*** Apologies for cross postings *** **AI per la Sostenibilità @Ital-IA 2023*- Call For Papers - *** DEADLINE March, 19 *** https://www.ital-ia2023.it/workshop/ai-per-la-sostenibilita ---------------------------------------------------------------------- Workshop presso il*Terzo Convegno Nazionale CINI sull'Intelligenza Artificiale Ital-IA*(https://www.ital-ia2023.it/) 29-31 Maggio 2023, Pisa, Italy Ital-IA è il terzo Convegno Nazionale CINI sull'Intelligenza Artificiale, organizzato per sviluppare obiettivi comuni tra istituzioni pubbliche, industria italiana e la ricerca scientifica delle università e dei centri di ricerca nazionali. Ital-IA ha l'ambizione di "fare rete nazionale" tra tutte le azioni che si stanno disegnando in questi mesi in Italia per cogliere le potenzialità di sviluppo legate alle tecnologie dell'Intelligenza Artificiale. Il convegno è organizzato dal Laboratorio Nazionale "Artificial Intelligence ed Intelligent Systems" (AIIS), creato dal CINI (Consorzio Interuniversitario Nazionale per l'Informatica). Il Laboratorio è stato creato nel Giugno 2018 con il sostegno del Dipartimento di Informazione e Sicurezza della Presidenza del Consiglio dei Ministri (come indicato nel recente rapporto del DIS "Relazione sulla Politica dell’Informazione per La Sicurezza 2018") per sviluppare obiettivi comuni tra istituzioni pubbliche, industria italiana e la ricerca scientifica delle università e dei centri di ricerca nazionali. Il laboratorio conta oggi 57 nodi che includono quasi tutti gli Atenei Italiani oltre a CNR, FBK e IIT. For any information: marco.polignano(a)uniba.it ========= ABSTRACT ========= La rapida evoluzione dell'Intelligenza artificiale dell'ultimo decennio ha spinto la ricerca verso lo sviluppo di tecnologie sempre più sofisticate e accurate basate su enormi quantità di dati. Tali sistemi si sono dimostrati un ottimo strumento per supportare processi volti alla sostenibilità Ambientale, Economica e Sociale sia lato produttivo che lato di ricerca grazie alla loro eccezionale capacità di comprensione dei dati (strutturati e non), pianificazione e reasoning. In questo workshop si vogliono discutere quei sistemi di AI in grado di agire in tale ambito ed aiutare aziende e università ad affrontare i temi della sostenibilità ed efficienza. E' difatti prerogativa dell'Unione Europea rendere possibile il transitare quanto prima verso soluzioni produttive sostenibili, efficienti e attente al benessere dell'ambiente e dei lavoratori. Tuttavia gli stessi modelli di Intelligenza Artificiale possono essere estremamente energivori e poco attenti alla sostenibilità, sopratutto ambientale (eg. basti pensare ai grandi modelli di comprensione del testo proposti dalle grandi multinazionali). Pertanto oggetto del workshop è anche il tema della sostenibilità dei modelli di AI e alla possibilità di renderli meno impattanti e più efficienti. ====== TOPICS ====== Gli argomenti di interesse del workshop sono (ma non limitati a): • AI e metodi di data mining per la valutazione automatica e il ranking di valori di sostenibilità sociale, economica e ambientale; • Risorse e strategie di valutazione per le strategie di sostenibilità sociale, economica e ambientale; • Tecnologie basate su AI per il monitoraggio e la valutazione di diversi aspetti delle procedure di mantenimento della sostenibilità sociale, economica e ambientale (ma non limitati a), impronta di carbonio, diversità e inclusione, equo commercio, giustizia sociale, impatto ambientale, ecc.; • Rilevamento automatico e prevenzione dei rischi legati alla non sostenibilità di processi ed attività sia come obblighi nazionali ed internazionali che di gestione del rischio riferiti (ma non limitati a), farmacovigilanza, sicurezza alimentare, disuguaglianza ed esclusione, mobbing sul lavoro, fake o contenuti imprecisi, stereotipi etnici e altri linguaggi insensibili; • Approcci di AI e tecnologie di NLP per interpretare e modellare il posizionamento e la percezione del livello di sostenibilità sociale, economica e ambientale; • Modellazione di correlazioni tra le politiche, le azioni e le dichiarazioni sulla sostenibilità di un'azienda con il pubblico; • Estrazione, annotazione e integrazione dati, inclusi report aziendali, studi di impatto ambientale, reclami dei consumatori, registrazioni delle donazioni relative alle azioni volte alla sostenibilità, problemi, registrazioni di violazioni e sanzioni relative a questioni di sostenibilità, notizie e dati dei social media; • Adattamento e sinergia di approcci e soluzioni di AI e sostenibilità; • Modelli di AI sostenibili ed efficienti. ============ SUBMISSIONS ============ I contributi dovranno essere caricati, entro il 19 Marzo 2023, al seguente link: https://www.ital-ia2023.it/submission/insert selezionando come topic lo workshop cui si intende sottomettere. * I contributi devono avere valenza tecnica e scientifica, e devono preferibilmente riferirsi a progetti in corso o avere un taglio applicativo in relazione al workshop. * I contributi, la presentazione ed il poster possono essere redatti sia in lingua italiana che inglese. * I contributi devono essere di almeno 2 e di massimo 6 pagine (incluso References) e devono essere redatti seguendo uno dei template (LaTeX o Word) disponibili ai seguenti URL: o Latex:https://www.ital-ia2023.it/static/frontend/ital-ia2023.zipo come template Overleafhttps://www.overleaf.com/latex/templates/ital-ia-2023-template/hqdd… o Word:https://www.ital-ia2023.it/static/frontend/ital-ia2023_docx.zip In particolare, si richiede di utilizzare: + il file sample.tex o Template.docx nel caso acconsentiate alla pubblicazione su CEUR-WS.org e il vostro contributo sia in inglese e di almeno 5 pagine + il file sample_NOPUB.tex o Template_NOPUB.docx nel caso non acconsentiate alla pubblicazione su CEUR-WS.org *Ogni contributo dovrà essere coperto da almeno una registrazione all'evento.* Tutti i contributi accettati per la presentazione saranno resi disponibili sul sito della conferenza con licenza Creative Commons License Attribution 4.0 International (CC BY 4.0). I contributi accettati redatti in inglese e superiori alle 5 pagine saranno pubblicati su CEUR Workshop Proceedings (CEUR-WS.org) e indicizzati da Scopus, previo consenso degli autori esplicitato durante l'invio. Sono accettati anche contributi che descrivano attività e approcci già presentati in altri convegni o pubblicati su rivista. Per garantire la pluralità nelle discussioni all’interno dei workshop,*i vari gruppi di ricerca sono pregati di inviare al più un solo contributo*, che può essere complessivo delle varie attività e progetti in corso, per ogni workshop. I contributi selezionati v*erranno presentati in forma di poster o di breve presentazione i giorni 29 e 30 Maggio*, in modo che nella giornata seguente se ne possano raccogliere i contenuti in forma aggregata, per delineare un quadro delle attività di ricerca e sviluppo italiane nell'Intelligenza Artificiale nei diversi settori applicativi. ================ IMPORTANT DATES ================ * Paper submission: March 19, 2023 (GMT) ============= ORGANIZATION ============= Prof.ssa Michela Milano, Università di Bologna Alma Master Studiorum, Italy Dott. Roberto Pellungrini, Scuola Normale Superiore di Pisa, Italy Dott. Marco Polignano, Università degli Studi di Bari Aldo Moro, Italy

2 years, 1 month

1
0
0 0

A Friendly Reminder - Call for Paper - Abstract (1-2 pages) by March 15, 2023.

by Giuseppe Caggianese

Dear Colleagues, a friendly reminder to contribute with an Abstract (1-2 pages) to the special session on “eXtended Reality as a gateway to the Metaverse: Practices, Theories, Technologies and Applications” in the 2023 IEEE International Conference on Metrology for eXtended Reality, Artificial Intelligence, and Neural Engineering (IEEE MetroXRAINE 2023) that will be held on October 25-27, 2023 in Milan. https://metroxraine.org/special-session-17 Please see the CfP below for details and forward it to colleagues who might be interested in contributing to this special session. Visit the conference website for further and updated information https://metroxraine.org/. I'm looking forward to meeting you, virtually or in your presence, at IEEE MetroXRAINE 2023. Best wishes, Giuseppe Caggianese ==================================================================================== Call for Papers - Special Session on: “EXTENDED REALITY AS A GATEWAY TO THE METAVERSE: PRACTICES, THEORIES, TECHNOLOGIES AND APPLICATIONS” https://metroxraine.org/special-session-17 2023 IEEE International Conference on Metrology for eXtended Reality, Artificial Intelligence, and Neural Engineering (IEEE MetroXRAINE 2023) https://metroxraine.org/ October 25-27, 2023 - Milan, Italy. ==================================================================================== SPECIAL SESSION DESCRIPTION ------------------------- The fast development of Virtual Reality (VR), Augmented Reality (AR), and Mixed Reality (MR) solutions over the last few years are transforming how people interact, work, and communicate. The eXtended Reality (XR) term encloses all those immersive technologies that can shift the boundaries between digital and physical worlds to realize the metaverse. According to tech companies and venture capitalists, the metaverse will be a super-platform that convenes sub-platforms: social media, online video games, and ease-of-life apps, all accessible through the same digital space and sharing the same digital economy. Inside the metaverse, virtual worlds will allow avatars to carry out all human endeavours, including creation, display, entertainment, social, and trading. Thus, the metaverse will evolve how users interact with brands, intellectual properties, health services, cultural heritage, and each other things on the Internet. A user could join friends to play a multiplayer game, watch a movie via a streaming service and then attend a university course precisely the same as in the real world. The metaverse development will require new software architecture that will enable decentralized and collaborative virtual worlds. These self-organized virtual worlds will be permanent and will require maintenance operations. In addition, it will be necessary to design an efficient data management system and prevent privacy violations. Finally, the convergence of physical reality, virtually enhanced, and an always-on virtual space highlighted the need to rethink the actual paradigms for visualization, interaction, and sharing of digital information, moving toward more natural, intuitive, dynamically customizable, multimodal, and multi-user solutions. This special session aims to focus on exploring how the realization of the metaverse can transform certain application domains such us: (i) healthcare, in which the metaverse solutions can, for instance, improve the communication between patients and physicians; (ii) cultural heritage, with potentially more effective solutions for tourism guidance, site maintenance, and heritage object conservation; and (iii) industry, where to enable data-driven decision making, smart maintenance, and overall asset optimisation. More information can be found here: https://metroxraine.org/special-session-17 TOPICS ---------- The topics of interest include, but are not limited to, the following: - Hardware/Software Architectures for metaverse - Decentralized and Collaborative Architectures for metaverse - Interoperability for metaverse - Tools to help creators to build the metaverse - Operations and Maintenance in metaverse - Data security and privacy mechanisms for metaverse - Cryptocurrency, token, NFT Solutions for metaverse - Fraud-Detection in metaverse - Cyber Security for metaverse - Data Analytics to Identify Malicious Behaviors in metaverse - Blockchain/AI technologies in metaverse - Emerging Technologies and Applications for metaverse - New models to evaluate the impact of the metaverse - Interactive Data Exploration and Presentation in metaverse - Human-Computer Interaction for metaverse - Human factors issues related to metaverse - Proof-of-Concept in Metaverse: Experimental Prototyping and Testbeds IMPORTANT DATES ------------------------ Abstract Submission Deadline: March 15, 2023. **NOTE that the abstract should be 1 - 2 pages. Final Paper Submission Deadline: April 30, 2023. Full Paper Acceptance Notification: June 15, 2023 Final Paper Submission Deadline: July 31, 2023 SUBMISSION AND DECISIONS ------------------------ Authors should prepare an Abstract (1 - 2 pages) that clearly indicates the originality of the contribution and the relevance of the work. The Abstract should include the title of the paper, names and affiliations of the authors, an abstract, keywords, an introduction describing the nature of the problem, a description of the contribution, the results achieved and their applicability. As an alternative to the traditional abstract, it is possible to submit a Graphical Abstract. For further information, please see here: https://metroxraine.org/initial-author-instructions. When the first review process has been completed, authors receive a notification of either acceptance or rejection of the submission. If the abstract has been accepted, the authors can prepare a full paper. The format for the full paper is identical to the format for the abstract except for the number of pages: the full paper has a required minimum length of five (5) pages and a maximum of six (6) pages. Full Papers will be reviewed by the Technical Program Committee. Authors of accepted full papers must submit the final paper version according to the deadline, register for the workshop, and attend to present their papers. The maximum length for final papers is 6 pages. All contributions will be peer-reviewed and acceptance will be based on quality, originality and relevance. Accepted papers will be submitted for inclusion into IEEE Xplore Digital Library. Submissions must be written in English and prepared according to the IEEE Conference Proceedings template. LaTeX and Word templates and an Overleaf sample project can be found at: https://metroxraine.org/initial-author-instructions. The papers must be submitted in PDF format electronically via EDAS online submission and review system: https://edas.info/newPaper.php?c=30746. To submit abstracts or draft papers to the special session, please follow the submission instructions for regular sessions, but remind to specify the special session to which the paper is directed. The special session organizers and other external reviewers will review all submissions. More information can be found here: https://metroxraine.org/initial-author-instructions CONFERENCE PROCEEDINGS ----------------------------------- All contributions will be peer-reviewed, and acceptance will be based on quality, originality, and relevance. Accepted papers will be submitted for inclusion into IEEE Xplore Digital Library. Extended versions of presented papers are eligible for post-publication; more information will be provided soon. ORGANIZERS ------------- Giuseppe Caggianese National Research Council of Italy giuseppe.caggianese(a)cnr.it Ugo Erra University of Basilicata ugo.erra(a)unibas.it Luigi Gallo National Research Council of Italy luigi.gallo(a)cnr.it For any questions related to the special session, please feel free to contact us via email. Giuseppe Caggianese, Ph.D. ------------------------------------------------------------- Research Scientist National Research Council (CNR) Institute for High-Performance Computing and Networking (ICAR) Via Pietro Castellino 111, 80131, Naples, Italy Telefono: +39 0816139227 Mobile: +39 3371588044 Skype: giuseppe.caggianese Email: giuseppe.caggianese(a)cnr.it

2 years, 1 month

1
0
0 0

10th European Conference On Service-Oriented And Cloud Computing (ESOCC 2023): Third Call for Submissions

by Announce Announcements

*** Third Call for Submissions *** 10th European Conference On Service-Oriented And Cloud Computing (ESOCC 2023) October 24-26, 2023, Golden Bay Beach Hotel, Larnaca, Cyprus https://cyprusconferences.org/esocc2023/ (Proceedings to be published in Springer LNCS; Journal Special Issue with Springer Computing) AIM AND SCOPE Nowadays, Service-Oriented and Cloud Computing are the primary approaches to build large-scale distributed systems and deliver software services to end users. Cloud-native software is pervading the delivery of enterprise applications, as they are composed of (micro)services that can be independently developed and deployed by exploiting multiple heterogeneous technologies. Resulting applications are polyglot service compositions that can then be shipped in serverful or serverless platforms (e.g., using virtualization technologies). These characteristics make Service-Oriented and Cloud Computing the natural answers for fulfilling the industry’s need for flexibly scalable and maintainable enterprise applications, to be delivered through state-of-the-art methodologies, like DevOps. To further support this, researchers and practitioners need to create methods, tools and techniques to support cost-effective and secure development as well as use of dependable devices, platforms, services and service-oriented applications in the Cloud, now also considering the Cloud-IoT computing continuum to exploit widespread adoption of smart connected things and the increasing growth of their computing capabilities. The European Conference on Service-Oriented and Cloud Computing (ESOCC) is the premier conference on advances in the state-of-the-art and practice of Service-Oriented Computing and Cloud Computing in Europe. ESOCC aims to facilitate the exchange between researchers and practitioners in the areas of Service-Oriented Computing and Cloud Computing, as well as to explore the new trends in those areas and foster future collaborations in Europe and beyond. TOPICS OF INTEREST ESOCC 2023 seeks original, high-quality contributions related to all aspects of Service-Oriented and Cloud computing. Specific topics of interest include, but are not limited to: • Applications for Service-Oriented and Cloud Computing, e.g., big data, commerce, energy, finance, health, scientific computing, smart cities • Blockchains for Service-Oriented and Cloud Computing • Business aspects of Service-Oriented and Cloud Computing, e.g., business models, brokerage, marketplaces, costs, pricing • Business processes, e.g., service-based workflow deployment and management • Cloud interoperability, service and Cloud standards, • Cloud-IoT computing continuum, e.g., edge computing, fog computing, mobility computing, next generation services/IoT • Cloud-native architectures and paradigms, e.g., microservices and DevOps • Cloud service models, e.g., IaaS, PaaS, SaaS, DBaaS, FaaS, etc. • Deployment, composition, and management of applications in Service-Oriented and Cloud Computing • Foundations and formal methods for Service-Oriented and Cloud Computing • Enablers for Service-Oriented and Cloud Computing, e.g., service discovery, orchestration, matchmaking, monitoring, and analytics • Model-Driven Engineering for Service-Oriented and Cloud Computing • Multi-Cloud, cross-Cloud, and federated Cloud solutions • Requirements engineering, design, development, and testing of applications in Service-Oriented and Cloud Computing • Semantic services and service mining • Service and Cloud middlewares and platforms • Software/service adaptation and evolution in Service-Oriented and Cloud Computing • Storage, computation and network Clouds • Sustainability and energy issues in Service-Oriented and Cloud Computing • Quality aspects (e.g., governance, privacy, security, and trust) of Service-Oriented and Cloud Computing • Quality of Service (QoS) and Service-Level Agreement (SLA) for Service-Oriented and Cloud Computing • Social aspects of Service-Oriented and Cloud Computing, e.g., crowdsourcing services, social and crowd-based Clouds • Virtualization for Service-Oriented and Cloud Computing, e.g., serverless, container-based virtualization, VMs IMPORTANT DATES • Submission of abstracts: June 4th, 2023 (AoE) • Submission of full papers: June 11th, 2023 (AoE) • Notification to authors: July 14th, 2023 (AoE) • Camera-ready versions due: July 31st, 2023 (AoE) TYPES OF SUBMISSIONS ESOCC 2023 invites submissions of the following kinds: • Regular Research Papers (15 pages including references, for the technical and special tracks) • PhD Symposium (12 pages including references) • Projects and Industry Reports (Projects and Industry Reports (1 to 6 pages including references, describing an ongoing EU or national project, or providing industrial perspectives on innovative applications, technologies, or methods in ESOCC’s scope) We only accept original papers, not submitted for publication elsewhere. The papers must be formatted according to the proceedings guidelines of Springer’s Lecture Notes in Computer Science (LNCS) series (http://www.springer.com/lncs). They must be submitted to the EasyChair site at:  https://easychair.org/conferences/?conf=esocc2023 by selecting the right track. Accepted papers from all tracks will be published in the main conference proceedings by Springer in the LNCS series. For publication to happen, at least one author of each accepted paper is expected to register and present the work at the conference. The best papers accepted will be invited to submit extended versions for a Journal Special Issue to be published by Springer Computing. ORGANISATION General Chair • George A. Papadopoulos, University of Cyprus, CY (george at ucy.ac.cy) Program Chairs • Florian Rademacher, University of Applied Sciences and Arts Dortmund, DE (florian.rademacher at fh-dortmund.de) • Jacopo Soldani, University of Pisa, IT (jacopo.soldani at unipi.it) Steering and Program Committee https://cyprusconferences.org/esocc2023/committees/

2 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

Hcitaly March 2023